iwols

thanks peter but when you integrate a 10 min sub and a 5 min sub together what would you use ,cheers

hi all what length exposure of darks do you use when your imaging exposures differ,ie when i integrate say a series of 10 min subs with 5 min subs what would you use for the darks, cheers

what is your favourite camera ollypenrice,the one im using is the atik 414ex,great little ccd

just taken a few darks and suprised how many bad pixels i have,this has been stretched quite a bit is this normal thanks

thanks just managed to get -13.7 with door open,might wait till tonight when temp drops to be sure?

hi just about to start a dark library, but can only cool ccd to -12 at the minute ,i image at -15,is this a problem?

Cheers guys would you say mainly planetary imaging

hi all been that tied up trying to get my ts 100 /atik 414ex mono up and running ive left my c8 edge alone but feel it needs a run out,,dont want to upset my ts100 set up for obvious reasons so just wondering what this scope would be useful for and what camera would you suggest and why,ive got a spare asi 178 c uncooled if that helps ,any thoughts comments appreciated

about 1 1/2 hours lum and about 40 mins each of rgb,is it worth getting any more data ,not sure when to stop thanks

thanks guys great feedback on black,just got to figure out where to clip the black less ,thanks

not a lot of processing on this one but comments /suggestions/critic always welcome cheers

sorry wrong button

not had no joy with the moon and guide camera ,so what i did was set focus up during the day on a distant object,then try at night with a bright star ,slightly adjusting focus,really had to turn exposure down ,used sharpcap to do continues downloads while adjusting focus,when your in focus then try with phd,just gone through same thing

any web page in particular neil for the clouds forecast?

would be nice for a windows based app

hi is this just an iphone app and not for the laptop?

thanks but soldering isnt a problem,loading the software might be though?

cheers sloz thats the one i ordered i think................https://www.ebay.co.uk/itm/Arduino-Nano-V3-0-ATMega328P-CH340G-Compatible-Board-USB-Cable-SOLDERED/282822682905?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

thanks appreciated

thanks parts on order

thanks where is the usb port on the DRV8825-HW203 Driver Board PCB sorry for all the questions so i just need the 1....DRV8825-HW203 Driver Board PCB , 2....the parts list then 3.....and would this motor be ok https://www.ebay.co.uk/itm/Nema-14-Stepper-Motor-0-9deg-400-steps-rev-0-4A-11Ncm-15-6oz-in-Bipolar-4-wires/121679235016?hash=item1c54a5c7c8:g:9BkAAOSwgQ9Vjiwg is that all i need cheers

is this usb controlled

thanks julian do they do it as a kiit with the components as well,had a look but very unsure what i need exactly thanks

wow do these units come prebuilt (pcb wise)