drivera

Ah didn't think I could do it in the daytime. I'll hook the camera up without the flattener and see if I can focus during the day time, plus check again nothing is loose. It is very weird.

Oh amazing thanks for the recommendation.

Ah yes thank you! My budget ideally would be < £2k, but also thought given the mounts weight the scope wouldn't extend / push past that anyway? But could assume wrong?

Hey, I tried to quickly surmise my situation in the topic! So in the UK it's been terrible weather for months and with limited time (can't image during the week) it was about 2 1/2 months since I have tried to image. I have a GT71 setup with a ZWO 533MC, on my GEM45 (don't get me started but won't be upgrading soon). I went to image about 3 weeks ago on my first calendar cleared/clear skies and I suddenly couldn't get focus, even more, the stars were off and my mask couldn't pull any spikes. I always take my scope and gear all off, don't touch it, store it and return it for my next session. Something has gone wrong and maybe suddenly knocked (wife wants to blame a cleaner, and I want to blame the wife so we resulted in natural causes and force majure). I'm doing first tests on it on my next clear night such as removing the flatenner to see if it is that or not. Otherwise, something has damaged the scope and it seems FLO are manic busy can't do any tests, and I will see if Rother Valley can do a check. It's also out of warranty. So...back to my main next question. I'm going to have to buy a new scope. I've loved the GT71 for widefield and it's beautiful but I would love to get into galaxies more. I have been trying but unsuccessfully identifying the right scope like a RC8/10 that would provide great images for galaxies, but under acceptable GEM45 weight (45lb/20kg). I'll be imaging with my 533MC until in the next 4-6 months I'll step up to mono (not sure which camera). What scope would you go for to image galaxies but can handle the weight on GEM45. Thanks!

Hi, I have a recently purchased (few months now) GEM45 with iPolar. In the last three to four attempts using iPolar, it connects to the iPolar but then says 0 stars detected. I've tried this using my Mac and Parallels windows version. I'm at a loss...on whats going on. It shows the USB/driver connect for the software and then nothing for stars. Cheers

Awesome thank you! Seems like that might have been it. Just did the files again and they're fine, so came out okay! This is cropped but no vingette at all when I stacked them.

Aah I wonder if that could have been it, as I did it after a night out shooting - brought it in and then about half-hour to hour later I did the flats. Will try again soon now its been inside and temps settled

Hi there, I completed flats this morning with my 533MC, GT71. I used Kstars to capture them with an ADU of 30000, and tolerance of 1k. I went to stack them and have a terrible purple vingette around the stacked file. I validated it was my flats when I stacked without them. What causes this? Is it the light source or something else? The image attached is stretched in Siril straight after stacking.

Hey there, I'm looking at a winter project and I'm seeking some advice for someone in the UK ( not sure with category to put this in). I'm on 0.6 of an acre and decided (with the bosses permission) to start building a dome. I have been researching kits and some range from £3k to £20k and I'm a bit intrigued if people have tried to build their own retractable domes through a DIY or half makeshift shed that would do the trick? Otherwise recommended kits. OR... A semi-portable 360' pier or fixed pier with a moveable shed to cover during poor weather nights but controllable? Many thanks, Steve

Hi there, I have recently gotten the GEM45 mount, using a WO GT71 and a ASI120MM for guiding. I am a bit lost at how to 'set it up' correctly for each imaging according to their manual. I run it off Astroberry with KStars and internal guiding (but looking at PHD2 soon if I figure it out). iOptrons manual says to do a One Star Alignment each time you set it up. It says it displays an alignment star, and then using the arrow keys to centre it in the eyepiece then press enter. Do people do this when using it for imaging? Do I go ahead and just do a sample shot through my main scope not guide scope at the pointed star and do a plate solve to check it's perfectly in the middle? If it's not then adjust to make it in the middle and then I'm good to go? I have noticed that when I do GoTo it is off and won't be on point so then I use platesolving/slew to target which finds it, but then my guiding is at about 1.2-1.5rms? Should I do one or two star alignment each time I setup? Thanks!! Steve

I attempted the Veil last night. Omg it was painful. My Redcat has been replaced by a GT71 as I broke the Redcat 😞 When I got the GT71 I also purchased the L-Extreme filter to see. I'm shooting with a Sony A7iii and I feel theres something weird going on with the sensor - I can't get my bias/darks right. I'm trying to understand if it's okay or not by reading up on ADU values etc. 🤷‍♂️ Great point on framing! The GT71 is a bit on the heavy side, and I was using the new WO Base for the SGP and I messed up the levels, so my guiding was shot. The camera was upside down so I was taking a shot then watching it on the laptop, then moving it and it was so hard to get the framing. I was running out of time so I saw a clip and decided to run with it. I just can't seem to learn how to process images correctly! I did this with Siril then Photoshop 😕. This is: - 30 Lights x 180s - 20 Darks - 20 Flats - 40 Biases. My first attempt! I'm lost on the processing side.....but guess slowly but surely? Oh yeah excuse the upside/down/wrong way image.

That's awesome!! It gives me hope with the same setup; SGP and a Redcat + Sony A7iii (not astro modded though). I'm hoping I get some clear skies soon in Kent as I really want to attack the Veil nebula!

Hi there, I was trying to understand how much I need to re-align my PA scope in my Sky Guider Pro. If the drawing attached is an object the inner circle in the scope at the cross hairs is that fine for PA or should it be absolutely still when rotating 360?

I'm thinking I'm going to pull the trigger - it's about 250 over budget for me. But if the triplet is better than the doublet and if my mount may struggle now, it sets me up for the right one in 12-24 months when I get a better mount (GoTo etc). I was leaning around the WOZS71 after all the reviews/back & forth etc than the WOZS81 due to the price as its about on point for budget. The WO ZS71 looks decent so was trying to now narrow if its worth the difference and price pain.

Thats really interesting. I thought it was 2.93kg so I have been pre-empting my total weighting around 4.3kg with all the stuff. I'm wondering if I do move the guidescope/cam to the counterweight bar it can assist.