Gorr_77

I'snt Geoptik doing 303? - problem with rust?

... small works keep adding on and on to the finale price..

... i could try tap it 5mm or so not too much so there is no strain on the tap bit....use a bolt to the end of the thread and the rest a pin, .

I have an answer back: £400 for Grade 304, and side holes for locking nuts - i will have to tap it.

It is going on gemini E.fric with C11 on it / 120-140 Apo + 5kg the rest +10% for the future use...Also it is cheaper to do all at once with extra one....

That is really good guys, i am on the verge to try to build it myself , but all the "ready made ones" are easy to carry and i am kind of "non lifter :":)

hi All, I am hoping to get away (eventually ) to the remote locations - i mean away from power sockets, not like i do - remote on the extension . What is the best most reliable power bank/station you have had? i.e: UKing Portable Power Station, 222Wh / 60000mAh emergency power with DC / AC inverter and LCD display, 320V AC, charging via solar panel for camping emergency, backup

I have only one quote, so not sure about price - i do remember that old day it will only cost few bobs... Aiming for 30kg on approx 350mm long bar...

I am just thinking to get a bench drill for £90 and drill it in my shed.. But that might be a cost to do side holes in the same workshop I will find out.

..So i guess there is no point to service it yet, and save some money. Thank you.

sorry - Moonlight Focuser

Hmmm. weird.. running it max in a max out for last 20 min - and is cold.

Thank you all. really thinking on a paint scheme... I've been quoted for the below: £300 in SS316. but no chamfered edges or locking holes, What do you think? 120.65MM DIA with 32MM HOLE DOWN CENTER 2x 150mm length 1x 75mm length 1x40mm length 1x20mm length

Thank you for that, Many small things.... I didn't install a extension ring from moorlight -focuser very loose on the connection to the tube - loosen up, very close focus - and yes SGP took long time to figure out, zoom out. Silly me. Greg

RASP Man!!! SO Pro ON Pi4

I've run just my camera and old good lens and is fine. Now i am thinking that maybe is the ASCOM but you are let me try focus... i never seen anything like this... or i forgot ... getting old???

Hi All, I've installed my SX694 with SX Fwheel and X2 on new laptop Win10. After sorting everything out with SX guys - ( they are the best customer service ever!!!:)), i am still stuck and i am not sure why but my camera wont take a picture. Other camera plug and play - no problems. Am I out of focus? - through the eyepiece is fine: pointing at the line of trees 1/2 miles away. Binning 1x1, exposure 0..01., device manager is picking up both cans (SX software is all good).

I've never bothered with this, as i cant see - or i don't want to look for a difference in the image. Also as you ve said, after 10 min it is much better... have a look:

Hi All, I have few question regarding this popular sensor. Some time ago i've noticed defective pixels. DId you had or have issues with the partial defect columns on your 16200 sensor? how did it will affect the outcome? I can find any actuall issues. Print screen from my 16200 Colour: Regards

Hi All, What material would you use : Stainless Steel Grade 304 or Grade 316 if you are on the budget? Best Regards

You might be on it.....in the V4 menu they are options to run continuously or m-step, and last night i've left it on continuously....hmmm

Thank you SB I thought not... is not like it has to do max out several times or so.... the spacing is good and it has only few steps to adjust... I shouldn't left big candle lit next to it... t!!!!

Thanks. i will. I forgot to mention it is running through HiTechAstro V4 box on Hitec cable...

...i think i should use longer USBs cables so it is evenly covered.. !!

Hi Everyone, Recently i've linked lakeside focuser to ML, and after few hr of work, the heat on the motor is quite high. Just wondering if this is normal or i have a problem with power supply... Regards