Varavall

Oddly that is how it's been here in Spain over the past months. Maybe there is an explanation?

Exactly as I do it. In an earlier life I was an IT consultant and appreciate that when a saystem is working don't touch it! Only apply software updates if there is a need and of course keep a system backup for those hardware failures. My really cheap mini-pc works without problems. Stick with it; I know IT can be frustrating at times!

Just go to the scrap yard and buy a round or square lump of metal of the weight desired, for me under 1 euro, and put a threaded rod in the base of the smooth cunterweight bar and then drill a hole in the scrap metal equal to the diameter of the threaded rod, then affix with a nut. Use the proprietry weights for fine tuning. 1-2 euros or £0.80-1.75. It may look a tad rough but its dark 😁

Hi Assuming its the Baader corrector take a look at this I use a SW200pds and a Skywatcher coma corrector on an HEQ5 with round stars using a guidescope. The mount is probably overloaded but I get a PHD2 RMS of 0.25-0.6, but I have hypertuned the mount and replaced all the bearings with SKF ones. Maybe you could post a PHD2 log file? Best of luck!

Hi I wished to do similar using a ZWO camera and Nikon lenses and I have been down that route and found at certain points the guidescope fouled the mount. So I machined some scrap aluminium plates and attached them to the bar, and now I can fix the guidescape and mini PC to one plate and have a removable plate to attach the camera lens and focuser - see photo. It works very well for me.

The Heart and Soul nebulas taken over 11th, 12th and 13th March. 30x 600s Ha, 10x600s Sii, 13x600s Oiii Kit:: Nikon 135mm AI lens at f4, ZWO Nikon-filter wheel adapter, ASI1600MM-Cool, ZWO EAF, Astrodon 5nm Ha, Sii and Oiii filters, HEQ5 Pro modded mount, NINA, PHD2 Processed in ASTAP, Siril, GIMP and NX Studio

I guess that's £100 before thinking about what to sit it on. versus £1 for scrap aluminium tube.

True, but I use a socket wrench so I keep my blood where it belongs. 😉

I built a pillar mount out of scrap aluminium for £30 . If you are handy with tools, maybe an option for you.

Horsehead Nebula Kit: Nikon 300mm AI lens at f4.5, ZWO Nikon-filter wheel adapter, ASI1600MM-Cool, ZWO EAF, Astrodon 5nm Ha, Sii and Oiii filters, HEQ5 Pro modded mount, NINA, PHD2 Ha 40x300s, Sii 13x60s, Oiii 15x60s Processed in ASTAP, Siril and GIMP Taken 19th February

Here is a go at the Heart Nebula. Kit: Nikon 300mm AI lens at f4.5, ZWO Nikon-filter wheel adapter, ASI1600MM-Cool, ZW EAF, Astrodon 5nm Ha, Sii and Oiii filters, HEQ5 Pro modded mount Ha 18x600s, Sii 8x600s, Oiii 30x900s Processed in ASTAP, Siril and GIMP Taken 3rd and 5th February

Here is another effort of the Rosette Nebula using a shorter focal length setup to reveal more of the surrounding nebulosity. Kit: Nikon 300mm AI lens at f4.5, ZWO Nikon-filter wheel adapter, ASI1600MM-Cool, ZW EAF, Astrodon 5nm Ha, Sii and Oiii filters, HEQ5 Pro modded mount Ha 6x900s, Sii 7x600s, Oiii 7x900s Processed in ASTAP, Siril and GIMP Taken 5th February

I think I lost mine long ago 🤪 Good luck with the next attempt.

Hi GIMP has a native FITS reader and I have no problems opening and stretching such files. Maybe you could post the stacked FITS file in questio n here so we can see if I have the same problem or not. Then at least will will knw if its the file or your system that has a problem.

Here is my interpretation of the Rosette Nebula in my preferred bold and bright colours. 10 x Ha, 15 x Sii, 15 x Oiii all at 600s on the nights of 13th and 25th January Kit: SW 120ED with Mira 0.63x flattener/reducer, ZWO ASI1600MM-cool, astrodon 5nm filters, SW HEQ5 belt modded with upgraded bearings, NINA and PHD2 Processed in ASTAP, GIMP and Siril