russ Posted February 4, 2011 Share Posted February 4, 2011 I've just got the aluminium tripod version to use with my ED80. Looking forward to giving it a try but the weather doesn't look good this weekend.You'll love it with the ED80. Will be a great setup. Link to comment Share on other sites More sharing options...
Dave-Ryan Posted February 4, 2011 Share Posted February 4, 2011 I just have one little quirk, that may only be with the aluminium tripod version. I find that the pin on top of the tripod, that the mount head sits over, seems a little narrow so there is a little side to side movement even when the mount head is firmly secured.This should easily be solved with a piece of rubber or something similar but I was wondering if anyone else has found this little problem.I do have a HEQ5 so I will try the stainless steel tripod from that to see if this is an ally tripod only quirk. Link to comment Share on other sites More sharing options...
russ Posted February 4, 2011 Share Posted February 4, 2011 Mine came with the aluminium tripod initially and i did use it a couple of times. I didn't notice a problem with side to side motion, it seemed very tight. But i think i was more concerned about the amount of flex in the tripod legs when fully extended. With the 90mm f11 i was getting serious vibrations that were taking far too long to damp down. So i quickly sourced a steel tripod. Link to comment Share on other sites More sharing options...
Dave-Ryan Posted February 4, 2011 Share Posted February 4, 2011 I was looking for lightness and knowing I had the steel tripod from my HEQ5 decided the aluminium option was worth a try. Still not had a chance to try it yet so don't know if flexure will be a problem with the alluminium tripod. Link to comment Share on other sites More sharing options...
Dave-Ryan Posted February 4, 2011 Share Posted February 4, 2011 I've just tried the mount head on my HEQ5 steel tripod and I don't get the small side to side movement.The problem seems to be that the locking bolt, on the aluminium tropod, can not be tightened enough due to it being a little on the small side. I tried using the locking bolt from the steel tripod but the threaded part does not go through far enough.I'm sure this problem can be easily solved. I'm going to try using a small piece of rubber to see if this works. Link to comment Share on other sites More sharing options...
michael.h.f.wilkinson Posted February 4, 2011 Share Posted February 4, 2011 What is the smallest size the tripod can be packed in. Could it fit in a suitcase. The Vixen Mini Porta is supposed to require 79cm lengthwise in a suitcase, which is not really practical. I suppose the AZ4 is even bigger. Link to comment Share on other sites More sharing options...
Dave-Ryan Posted February 4, 2011 Share Posted February 4, 2011 The AZ4 aluminium tripod will also fold down to 79cm. Although you could dismantle it and take it down to 66cm.A spanner and screwdriver are supplied with the mount. Link to comment Share on other sites More sharing options...
michael.h.f.wilkinson Posted February 4, 2011 Share Posted February 4, 2011 Thanks! Link to comment Share on other sites More sharing options...
Dave-Ryan Posted February 11, 2011 Share Posted February 11, 2011 Well I tried folding a small piece of rubber over the pin, on top of the tripod, before I clamped the mount head down and found this has solved the side to side movement. Link to comment Share on other sites More sharing options...
kris h Posted June 27, 2011 Share Posted June 27, 2011 Very nice setup Andrew Link to comment Share on other sites More sharing options...
kris h Posted July 11, 2011 Share Posted July 11, 2011 I am fortunaly and have the Black model so i wouldn't look to bad in black or white, might go with black rings to keep with the orange and black theme. HI , i will getting one of these mounts soon to use with a c6 just wanted to ask what rings did get & where from got any pics of your c6 on the AZ4 mount please clear skies Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.