CowsonConcrete Posted November 29, 2010 Share Posted November 29, 2010 Hi,I have plossi eye pieces (which screw apart) & was wondering if all filters fit them. I'm looking at a set of four antares filters and just wanted advice.Thanks Link to comment Share on other sites More sharing options...
bcfcciderhead Posted November 29, 2010 Share Posted November 29, 2010 The Plossi eye pieces i have have a thread in them to screw filters into, no need to take apart, unless they do different types of course Link to comment Share on other sites More sharing options...
Moonshane Posted November 29, 2010 Share Posted November 29, 2010 Dave is quite right, assuming you are looking at 1.25" filters and using 1.25" plossls then the filter screws into the silver nosepiece end of the EP.you can also screw them into the diagonal (assuming it's 1.25" - if not then get 2" filters) as this saves changing the filter over each time you change an EP. don't forget it's on though - can get confusing! Link to comment Share on other sites More sharing options...
CowsonConcrete Posted November 30, 2010 Author Share Posted November 30, 2010 Thanks for the info guys. I've checked and can't see that either my ep's or prism have usable threads.Thanks again - thats saved me having an unwanted Xmas gift!! Link to comment Share on other sites More sharing options...
bcfcciderhead Posted November 30, 2010 Share Posted November 30, 2010 Take another look, i had to look twice, look at the end that goes into the focuser it might have small threads in there Link to comment Share on other sites More sharing options...
Taff Posted November 30, 2010 Share Posted November 30, 2010 Hi' with my plossl EPS' 1.25 i can fit colour' neb' and Light Poll filters which can be screwed on the EP. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.