connecting Atik314L to Skywatcher 0.85 flattener

[Fay]

I have the new dedicated 0.85 ED80 Skywatcher flattener. Screws directly into the tube then into the DSLR.

How do I connect my Atik 314L/ Astro Engineering filter wheel to it?

What connections would I need?

Thanks for any help

Fay

[skye at night]

If the filter wheel has nosepieces, you may have to remove them, and hopefully reveal female t threads... the reducer will hopefully screw to the front and then (you may need an adaptor) you can fit your dslr t-ring to the rear...

I have a similar setup with a different filter wheel and have a few positioning options.

Steve

[skye at night]

Just noticed you said atk 314l in the title and dslr in main post!!!!

the camera connection as I am sure you know will be different there.

Steve

[Fay]

Sorry, it is the Atik/ filter wheel connection I am interested in. Fine with the DSLR

[Merlin66]

As Steve said you should be able to expose the T thread on the filter housing and connect ( probably via a T thread spacer ring-depends on the back focus requirements of the FR) to the CCD.