Ags Posted July 28 Share Posted July 28 I am amusing myself by writing a browser based FITS image viewer. At the moment it loads whatever comes out of my ASI485MC, but I would like to try it on other FITS files from other cameras. I would appreciate it if anyone can provide a frame or two from other cameras. I am particularly keen on getting a frame from a 533MC as that is a camera I am planning on getting, or a frame from an OSC with a Bayer matrix other than RGGB. 2 Link to comment Share on other sites More sharing options...
symmetal Posted July 29 Share Posted July 29 Here's an Ha frame from an ASI6200MM. It's 116.7MB at 9576 x 6388 pixels so will test your handling of large files. 🙂 IC5070_Ha_300sec_gain_100_offset_NA_1x1_0C_2023-05-29_frame1.fit Alan 1 Link to comment Share on other sites More sharing options...
Ags Posted July 29 Author Share Posted July 29 They don't come much bigger, thanks. Link to comment Share on other sites More sharing options...
Mognet Posted July 29 Share Posted July 29 Single frame from an ASI585MC. A more normal size at 3840 x 2160. It's a colour image, although there doesn't seem to be much colour in that sub M_31_Light__100.fits 1 Link to comment Share on other sites More sharing options...
TiffsAndAstro Posted July 29 Share Posted July 29 22 hours ago, Ags said: I am amusing myself by writing a browser based FITS image viewer. At the moment it loads whatever comes out of my ASI485MC, but I would like to try it on other FITS files from other cameras. I would appreciate it if anyone can provide a frame or two from other cameras. I am particularly keen on getting a frame from a 533MC as that is a camera I am planning on getting, or a frame from an OSC with a Bayer matrix other than RGGB. I have a 533 colour cam and clouds Will upload a couple here soon as I can 1 Link to comment Share on other sites More sharing options...
Ags Posted July 29 Author Share Posted July 29 @symmetal It's a lovely sub but the browser times out when handling it... I can think of a few workarounds but will have to do a bit of coding. 1 Link to comment Share on other sites More sharing options...
TiffsAndAstro Posted July 29 Share Posted July 29 1 minute ago, Ags said: @symmetal It's a lovely sub but the browser times out when handling it... I can think of a few workarounds but will have to do a bit of coding. It's because that file is so large its warping spacetime 1 Link to comment Share on other sites More sharing options...
Ags Posted July 29 Author Share Posted July 29 The 585 loads but quite slowly, I need to multithread the loading if possible. Link to comment Share on other sites More sharing options...
Ags Posted July 29 Author Share Posted July 29 Here is @symmetal's sub loaded in my app. I cheated - I binned it 3x3! 2 Link to comment Share on other sites More sharing options...
CCD-Freak Posted July 29 Share Posted July 29 (edited) Here is a stacked fit file of M45 taken with an ASI533MC through a SS15028HNT captured and processed with AstroArt M45 QD-7.fit Edited July 29 by CCD-Freak 1 Link to comment Share on other sites More sharing options...
CCD-Freak Posted July 29 Share Posted July 29 (edited) Here is a single 120" sub of NGC253 taken with an ASI482MC non cooled "planet cam" through an AT6RC @ F7 NGC253-120s_014.fit Edited July 29 by CCD-Freak 1 Link to comment Share on other sites More sharing options...
TiffsAndAstro Posted July 30 Share Posted July 30 opps forgot, sorry. here's a light dark and bias from svbony533mc hope it helps. 2024-07-16_23-57-59__-5.00_60.00s_0008.fits2024-06-29_22-30-15__-5.10_60.00s_0009.fits 2024-06-29_22-51-41__-4.80_0.00s_0015.fits 1 Link to comment Share on other sites More sharing options...
Ags Posted July 30 Author Share Posted July 30 Good to get a non-ZWO camera! Maybe they do FITS differently. Link to comment Share on other sites More sharing options...
Ags Posted July 30 Author Share Posted July 30 (edited) 11 hours ago, CCD-Freak said: Here is a stacked fit file of M45 taken with an ASI533MC through a SS15028HNT captured and processed with AstroArt It is an interesting challenge. AstroArt is saving the data as 32-bit floating point (I think) and the color info is structured differently from a raw FITS from a camera that includes the bayer matrix. That's a lot of stuff I don't currently handle, so I'll come back to this one. I see astroart is setting the SIMPLE header to NaN - oopsy! Edited July 30 by Ags Link to comment Share on other sites More sharing options...
Xilman Posted July 30 Share Posted July 30 On 29/07/2024 at 00:10, Ags said: I am amusing myself by writing a browser based FITS image viewer. At the moment it loads whatever comes out of my ASI485MC, but I would like to try it on other FITS files from other cameras. I would appreciate it if anyone can provide a frame or two from other cameras. I can provide something over 38 thousand such. Unfortunately I am frantically busy preparing to return to La Palma tomorrow. Perhaps I'll send you a few when I get there. 1 Link to comment Share on other sites More sharing options...
Ags Posted July 30 Author Share Posted July 30 14 minutes ago, Xilman said: I can provide something over 38 thousand such. Unfortunately I am frantically busy preparing to return to La Palma tomorrow. Perhaps I'll send you a few when I get there. Thank you, there is no hurry, this is just a little side project that I am not rushing to finish. Link to comment Share on other sites More sharing options...
Ags Posted July 30 Author Share Posted July 30 2 hours ago, TiffsAndAstro said: opps forgot, sorry. here's a light dark and bias from svbony533mc hope it helps. The bayered Svbony 533 data loads with no issues in under 5 seconds. 1 Link to comment Share on other sites More sharing options...
Vroobel Posted July 30 Share Posted July 30 (edited) A luminance frame from ASI 2600MM Pro and one from ASI 2600MC Pro with L-eXtreme: 2600MM: NGC 6946 (Fireworks) with NGC 6939, 15s, Gain 101, Bin1: L__LIGHT__15.00s__-10.00C__2024-07-28_02-02-29__0440.fits 2600MC: The Cygnus, 180s, Gain 101, Bin1: Light_Sigma40mm_M29_180.0s_Bin1_20240728-014944_0045.fit Edited July 30 by Vroobel 1 Link to comment Share on other sites More sharing options...
daz Posted July 31 Share Posted July 31 I have the ZWO 533MC Pro, I can grab a couple off of the ASI Air...... back soon... Link to comment Share on other sites More sharing options...
daz Posted July 31 Share Posted July 31 Here you go Agnes... Light_M 39_60.0s_Bin1_20240728-233317_0105.fit Light_M 39_60.0s_Bin1_20240728-233453_0106.fit 1 Link to comment Share on other sites More sharing options...
TiffsAndAstro Posted July 31 Share Posted July 31 On 30/07/2024 at 12:19, Ags said: The bayered Svbony 533 data loads with no issues in under 5 seconds. Mine were via Nina btw not asiair btw in case it matters 1 Link to comment Share on other sites More sharing options...
Ags Posted July 31 Author Share Posted July 31 (edited) Some real progress, although it was painful getting there!. I handle different Bayer patterns like RGGB or GRBG dynamically. I can load ASI6200MM images (by sampling the image and not drawing every source pixel). I also handle both mono and RGB images. The HTML canvas I use is RGB regardless. Here is the 6200 monster frame loaded in the viewer. Edited July 31 by Ags 3 Link to comment Share on other sites More sharing options...
symmetal Posted August 1 Share Posted August 1 Looking good Ags. Are you using the cfitsio library to load the images and extract header info or are you doing it from scratch? You could display image info from the header in the area on the right. 😉 Alan Link to comment Share on other sites More sharing options...
Ags Posted August 1 Author Share Posted August 1 (edited) I started with fits.js but I have been modifying it heavily. I am going to add a header display option. as far as I know cfitsio doesn't have a Javascript option. Edited August 1 by Ags 1 Link to comment Share on other sites More sharing options...
Ags Posted August 2 Author Share Posted August 2 Well, I found a few issues so I reimplemented everything from scratch. I took out a lot of dead code from the fits.js library so it is mostly my code now. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now