Clip filter loose!

[johnst]

Hi anyone, just had an excellent couple of hours imaging, Vesta region, M42 and Horse head region but when I came to put away my gear I noticed my Eos clip filter from Astronomic was loose in my Canon so the adapter I use isn't holding it in place - it's a Good for Canon AF. I'm obviously not using the correct fitting - can anyone advise please.

[johnst]

Sorry about the info I have supplied, it's meant to say Kood adapter, cheers, John 

[Chefgage]

The clip in filter has two 'sprung legs' that hold it in place. You can adjust these but be very careful. By very gently bending them outwards by a little bit this makes the filter have a tighter fit.

[johnst]

Sorry about the info I have supplied, it's meant to say Kood adapter, cheers, John 

[johnst]

Thanks for that, will try it later👍

[johnst]

Have just fitted the CLS filter and found it tricky to open up the 'legs', I take it that the filter stays in place, I certainly wouldn't want to do it in the dark and outside!! Thanks for the info anyway 👍