martin_h Posted April 6, 2019 Share Posted April 6, 2019 Anyone using a EQ8 with SGP software? In the Telescope tab are the nudge controls greyed out on yours? Link to comment Share on other sites More sharing options...
hughgilhespie Posted April 6, 2019 Share Posted April 6, 2019 Hi Martin, I use an EQ8 via EQMOD with SGP. I can't check immediately as I have everything shut down / covered up due to recent bad weather here in Devon but - as far as I remember, the nudge controls were available. I will check this when I start up again. Regards, Hugh Link to comment Share on other sites More sharing options...
hughgilhespie Posted April 7, 2019 Share Posted April 7, 2019 Hi Martin, As I thought, when I open the Telescope tab in Control Panel, the Telescope Nudge controls are NOT greyed out. HTH. Regards, Hugh Link to comment Share on other sites More sharing options...
martin_h Posted April 7, 2019 Author Share Posted April 7, 2019 Humm... Many thanks, I wonder whats going on here then? Link to comment Share on other sites More sharing options...
sloz1664 Posted April 7, 2019 Share Posted April 7, 2019 Can you get it to work with EQMod Martin Steve Link to comment Share on other sites More sharing options...
sloz1664 Posted April 7, 2019 Share Posted April 7, 2019 I see you are connected to EQMod. But you are "Parked" so the nudge controls will not work until you "Unpark" Steve Link to comment Share on other sites More sharing options...
martin_h Posted April 7, 2019 Author Share Posted April 7, 2019 Connected, unparked - greyed out! Link to comment Share on other sites More sharing options...
martin_h Posted April 7, 2019 Author Share Posted April 7, 2019 The EQMod controls work ok, just the SGP ones greyed out. hey ho! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.