Celestron Inspire 100AZ

[CW 392]

I have recently purchased a Celestron Inspire 100 AZ and inclued are 2 Kellner eyepieces a 10 and 20m , using them I find them very frustrating to use and  image with , they seem not good quality and am going to upgrade, has anyone any advice and I am looking at Celestron eyepieces a Barlow and filters 

Any advice be would be appreciated

 

[Peter Drew]

A couple of Celestron Plossl's, a 25mm and 10mm plus a 2x Barlow would be a reasonable start. I wouldn't bother with the filters at this aperture to be honest. 

[CW 392]

Thanks very much Peter 

[laudropb]

It depends on how much you want to spend. I like the Celestron X-cel LX range.

[Ricochet]

You dont have to stick with Celestron eyepieces because you have a Celestron telescope. Astronomy eyepieces are standard sizes and so any 1.25" eyepieces from any manufacturer will work. You might also want to upgrade the diagonal as I suspect the one bundled with the scope is probably no better than the eyepieces. If you can give us an idea of your budget then people will be able to give better suggestions.