MESU Interface

[kirkster501]

Hi all, could someone with a MESU 200 confirm if it has a native USB port on it or it is serial DB9 connector still and I need to keep my Serial>USB thingy..... ?

Many thanks, Steve

[Zakalwe]

If it is a SiTech version then its a USB B connector.

 

[gnomus]

USB as Zakalwe says.  Is it due soon Steve?  Make sure you get Steve Richard's installation manual - makes it all very easy.

[steppenwolf]

As stated above, the connection is indeed via a USB port BUT SiTech will still ask you for a Serial Port number This is because the SiTech controller has its own USB to serial port convertor. You can find out what number has been defaulted to by checking the 'Serial' ports in your computer's Device Management section.

[kirkster501]

Thankyou guys.  Glad I can dispense with the USB converter doofashank thingy then

Yes Steve (Gnomus) it is due shortly and I have indeed downloaded all the materials from the Yahoo Groups page including Steve (Steppenwolf's) manuals.

Yes Steve (Steppenwolf), aware of the serial port in the USB drivers bit.  Thanks for the reminder though!

Yes (all Steve's) there are too many Steve's with a MESU 200

Steve (yet another one....)