Toucam and Vista again?

[beamer3.6m]

I'm sure this has been done to death by now but I am hoping to upgarde my laptop and would like to know if there are any drivers for the Toucam Pro II under Vista.

Cheers.

[Starflyer]

There are no Vista drivers for the Toucam Pro II. However, since these cams are the same internally to the SPC900NC cams, you can flash the SPC900NC firmware onto it and use the Vista drivers for that cam.

See section 6 here; http://home.zonnet.nl/m.m.j.meijer/D_I_Y/spc900nc.htm

I've done it and it was straight forward, but read and re-read all the documentation - a bad flash can kill a device :shock:

If you need any help just shout.

Cheers,

Ian

[ringz]

Hi beamer,

Try this web site to show how the XP drivers can be used in vista.

< http://www.p4c.philips.com/cgi-bin/dcbint/cpindex.pl?ctn=PCVC740K&scy=gb&slg=ENG&grp=PC_PRODUCTS_GR&cat=PC_CAMERAS_CA&sct=WEBCAMS_SU#

>

Click on the "Were are the Vista drivers for this webcam?" (sic) link

--

Martyn