bambuko Posted December 6, 2014 Share Posted December 6, 2014 If there was one thing that would improve my enjoyment of this excellent piece of kit, it would be the ability to rise it higher above the telescope tube.Of course Telrad has readily available riser blocks, but I haven't seen one for Rigel (and even if I did, I'd rather make things myself)I already had laying around 3" PVC guttering pipe and solvent weld cement from my plumbing projects.PVC pipe can be flattened, bent and shaped when heated with heat gun.Solvent cement makes permanent (if sometimes messy) joints.Making start:View inside (to the right joint strengthening doubler):Tools for the project:Doubler in place:tbc... Link to comment Share on other sites More sharing options...
spaceboy Posted December 6, 2014 Share Posted December 6, 2014 I'd always thought the Rigel finder to offer a better position over the Telrad anyway ?? Either way I'm all up for DIY threads hope it works out for you Link to comment Share on other sites More sharing options...
bambuko Posted December 6, 2014 Author Share Posted December 6, 2014 I'd always thought the Rigel finder to offer a better position over the Telrad ...Common optical illusion caused by one being vertical and other horizontal.Actual distance from the tube is more or less the same: Link to comment Share on other sites More sharing options...
bambuko Posted December 7, 2014 Author Share Posted December 7, 2014 Progress today:Just a foot to mount it to the tube left to do. Link to comment Share on other sites More sharing options...
rory Posted December 7, 2014 Share Posted December 7, 2014 Looking good . Must say that comparison picture with the telrad caught me out too. I always thought the Rigel stood higher than a telrad . Link to comment Share on other sites More sharing options...
bambuko Posted December 8, 2014 Author Share Posted December 8, 2014 and... the finished project ready for testing when the clouds part:Easy project, but well worth it (in my view) - should stop the pain in the neck Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.