Sticking LED lighting strip to Fiberglass

[Earl]

Normal sticky stuff on the led lights is not sticking to the fibeglass interior of my dome, what should i use instead?

[skybadger]

Hot glue from a glue gun. I bought 5m lengths of led strip for the interior lighting. Cut per length by section, it was self adhesive and stuck itself fine, but in one place where it came back off and wouldn't stay on, hot gun glue did the trick.

Mike

[pete_l]

Normal sticky stuff on the led lights is not sticking to the fibeglass interior of my dome, what should i use instead?

Stixall

it's (almost) all you'll ever need.

[Earl]

Im trying some clear gorilla tape first if that lets me down ill give these a try

[woodbob123]

You could also try sikaflex it's a pvc adhesive and used on boats to both seal and stick a cheaper alternative is seam sealant from a good motor factors

[michaelmorris]

Another vote for the hot glue gun.  A faff to use, but very effective.

[Earl]

Dont bother with gorilla tape, about as uslesss as celotape.