micjyfynn111 Posted September 11, 2013 Share Posted September 11, 2013 Hi folkswheres a good stating point for newbie astro photographer ?I have been advised to start with a DLSR. After looking at ccd, CMOS, DSLR andwebcams. I have no idea .. Thanks Link to comment Share on other sites More sharing options...
dmahon Posted September 11, 2013 Share Posted September 11, 2013 CCD will give you a better signal. Monochrome CCD with LRGB filters is easier to process and allows you to use narroband filters too (good for when the moon is up).DSLR is cheap - hence most start with it.More importnantly, you need a good mount before you even think about the camera. Link to comment Share on other sites More sharing options...
iksose7 Posted September 11, 2013 Share Posted September 11, 2013 The best way to start is fixed tripod astro imaging. You don't want to jump in the deep end and realise you are not interested!I started with just a Canon 1100D and a tripod. The 1100D is a great DSLR for those starting out, its cheap and can produce excellent results.I would 100% advise against getting a CCD unless you have a mount, scope, and a bit of experience imaging.What do you want to image? Nightscapes, widefield/constellations, deep space objects, planets? Link to comment Share on other sites More sharing options...
Derick Posted September 11, 2013 Share Posted September 11, 2013 A DSLR and a tripod wont allow you to do much except widefields...Most importantly, to start with astrophotography like dmahon said, is to get a equatorial mount... wether you wanna do planetary, deep sky objects even widefield... You need to make sure that mount can handle your setup... and the setup your excepting to buy in a near futur...what you want to buy will be according to what you want to watch/photograph so y0ou have to start with what your objectives are.. then find a mount before buying any otas... start with second hand equipement to start with.. to make sure you like it and so you dont waste to much money on it!Many things to consider... Link to comment Share on other sites More sharing options...
micjyfynn111 Posted September 11, 2013 Author Share Posted September 11, 2013 Thanks for all the advice, I have a bresser 6" f5 refractor andan EQ6 syntrek. I would like to try planetary and deep sky too.so the mount side of things is not an issue thankfully. Lunar seems like an excellent starting point. I think I will be looking at a moddeddslr , there seems to be a few around at reasonable prices. So what's the story with the 1100D ? I should think they are quite heavy,is this an issue.? Thanx ppl Link to comment Share on other sites More sharing options...
Derick Posted September 11, 2013 Share Posted September 11, 2013 Jesus mate, you have an EQ6!!! Don't have to worry about that yet! ;P Link to comment Share on other sites More sharing options...
Derick Posted September 11, 2013 Share Posted September 11, 2013 It is suppose to go up to 20Kg! Your 6" Bresser is about 23 lbs (roughly 10-11Kg). Don't worry about your 1100D aded to it! Link to comment Share on other sites More sharing options...
iksose7 Posted September 11, 2013 Share Posted September 11, 2013 My apologies! I didn't realise you already had a mount and scope! Ignore my post hahaThe 1100D is a great DSLR to get started with and like Derick said, dont worry about the weight too much if you have an EQ6! (i just ordered mine yesterday ) Link to comment Share on other sites More sharing options...
Derick Posted September 11, 2013 Share Posted September 11, 2013 My apologies! I didn't realise you already had a mount and scope! Ignore my post hahaThe 1100D is a great DSLR to get started with and like Derick said, dont worry about the weight too much if you have an EQ6! (i just ordered mine yesterday )What are you gonna put on your EQ6? not just your 1100D? Link to comment Share on other sites More sharing options...
micjyfynn111 Posted September 11, 2013 Author Share Posted September 11, 2013 Just seen some pictures taken with the new D60a , great images, a bit beyond my budget though...regarding weight of 1100d I was referring to the focuser / eyepiece not the mount payload. Thanks for the tips Link to comment Share on other sites More sharing options...
brantuk Posted September 11, 2013 Share Posted September 11, 2013 For planets use a webcam - you'll find it more straightforward - also get Registax to align and stack. For dso's use a dslr with Deep Sky Stacker (google both - they're free to d/l). Deffo get a modded dslr when you come to deep sky objects. Also - read up on guiding - I'd recommend Making Every Photon Count by Steve Richards as a good starting point for someone new to imaging.Nice scope and mount btw Link to comment Share on other sites More sharing options...
micjyfynn111 Posted September 12, 2013 Author Share Posted September 12, 2013 Great advice folks , thank you all Link to comment Share on other sites More sharing options...
iksose7 Posted September 12, 2013 Share Posted September 12, 2013 What are you gonna put on your EQ6? not just your 1100D?Haha yes, at the moment i image with the 1100D and an EF200L on an Astrotrac. The NEQ6 is the first step in building up my telescope rig. The scope will have to come at a later date because i'm, on a budget but the EF200L will more than suffice till then. Link to comment Share on other sites More sharing options...
brantuk Posted September 12, 2013 Share Posted September 12, 2013 Sound thinking - any imaging system starts with the most important bit - and that's the mount. You've got a good 'un. While you're saving you could always pick up a s/h 150P ota for under a hundred quid. Great scope and cheap as chips and you can always sell it on when you're near your money target. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.