EQ3-2 Dec Motor HELP with wiring

[gfletcher]

Hi Guys

I have dual axis motors for my EQ3-2 mount.

Unfortunately on the Declination motor, the wiring to the ST4 type socket has 2 of the 4 wires broken away from the circuit board.

I can solder these back on but i am uncertain as to which coloured wire goes to which solder point.

I attach pics of the connector and as can be seen the red and yellow wires are connected but the brown and blueygreen wires are the ones that have come away,

Does anyone out there have dual axis motors on there EQ3-2 , specificaly the Declination motor that could let me know which coloured wires go to which area ?

I really need help on this one as i hav'nt got a clue.

thanks guys

Graham

[BillRead]

Check the wiring sequence on the RA motor - they are apparently the same.

[gfletcher]

Thanks Bill i have sorted it now

[Pluto1948]

Thanks for the help sorted the problem out and working fine