ponytale Posted October 2, 2010 Share Posted October 2, 2010 web cam , first i have a spc 880 flashed to spc900 from gordons website , i have modded it as far as fitting the 4066 chip and switch but not the parallel cable , i have a usb laptop so i will probably get the converter and do that mod also if required , however i tried the cam in its current state and wxastrocapture seems to recognise it in comm port 4 , when i switch the camera to lx mode ( the switch on the camera)the image darkens quite a lot so i guess the mod is doing something, is this normal , the software seems to affect the camera ok, shutter speed, gamma, exposure etc , when i tick the long exposure box in camera rec mode it allows me to tick the box and adjust time , i am not sure if this actually working or not , is their an easy way to test this ? also can i take single frame long exposures ? any help/advice welcome Link to comment Share on other sites More sharing options...
astromerlin Posted October 2, 2010 Share Posted October 2, 2010 Sounds like you may need to adjust the port pin settings in WXastrocapture. I had the same effect until I got the check boxes right. On mine the invert box needed checking.What you should see on the screen when connecting to the LX port is a bright flash and then return to normal. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.