adamsp123 Posted February 18, 2010 Share Posted February 18, 2010 Can anyone please tell me what the distance is between the cmos chip and the front edge of the camera body (ie the bayonet plate) on a Canon 1000D?Cheers Pete Link to comment Share on other sites More sharing options...
MickyWay Posted February 18, 2010 Share Posted February 18, 2010 Hi Pete,Look at the top of your camera, and engraved on the left hand side is a circle with a line going through it. That is the standard mark on most SLRs and DSLRs for the film/sensor plane.Regards, Link to comment Share on other sites More sharing options...
BlueAstra Posted February 18, 2010 Share Posted February 18, 2010 I believe the distance is 55mm from the front mounting face to the CCD surface. Link to comment Share on other sites More sharing options...
Psychobilly Posted February 18, 2010 Share Posted February 18, 2010 Nope...From the front of an EOS T-mount to the FP will be 55mmI've posted a link many times to a wikipedia article which lists the info for just about every camera/lens mount out there but cant find it at the moment...Found a more comprehensive list now instead...http://www.graphics.cornell.edu/~westin/misc/mounts-by-register.htmlFor the EOS its 44.0 mmPeter... Link to comment Share on other sites More sharing options...
adamsp123 Posted February 18, 2010 Author Share Posted February 18, 2010 Thanks all! Link to comment Share on other sites More sharing options...
brendant Posted February 18, 2010 Share Posted February 18, 2010 The correct flange-to-focal-plane distance for all Canon EOS cameras is 44.0mm.Brendan Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.