Nick R Posted October 22, 2009 Share Posted October 22, 2009 Am i right that putting a scope in sleep mode and then taking the power supply away that it would have to be re aligned or would the computer remember and continue on wake up from its sleep knowing its last position.The scope would stay in its set position in the garden.Regards Nick Link to comment Share on other sites More sharing options...
Capricorn Posted October 22, 2009 Share Posted October 22, 2009 If you remove the power to the scope the data is not lost.You will have to realign.You will probably to supply the date and time again and align, Meade ETX's require this, even if the power is lost for a few seconds.Basically do anything and expect to realign it.Still after the 100th go you start to get good at it.:D:D Link to comment Share on other sites More sharing options...
Nick R Posted October 22, 2009 Author Share Posted October 22, 2009 Still after the 100th go you start to get good at it.:D:DThought so :D Thanks for the reply:cool: Link to comment Share on other sites More sharing options...
barkis Posted October 22, 2009 Share Posted October 22, 2009 Nick, Telescope House do a sleep dongle for the LX90, butI don't know if it will be suitable for your scope. Link to it here.Ron. http://www.telescopehouse.com/acatalog/Scope_Sleeper__BCF_.html Link to comment Share on other sites More sharing options...
Nick R Posted October 22, 2009 Author Share Posted October 22, 2009 Thanks for that Ron ,i will have to investigate Regards Nick Link to comment Share on other sites More sharing options...
Capricorn Posted October 23, 2009 Share Posted October 23, 2009 I'll have a look as well in case it fits a 105, know someone who may be interested if it does fit a 90. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.