AZ-EQ6 Broken internal cable

[Rob B]

I broke the connector on the RA encoder cable on my AZ-EQ6 PRO MC015 motherboard.

To purchase a new cable, from the manufacturer, needs a special order and will take 4 months to deliver.

Anyone knows a quicker way or used purchase?

[saac]

You might want to speak to Malcom , @malc c - he may be able to point you in the right direction. 

Jim 

 

 

[Laurin Dave]

You could try this place 5x Micro Plugs And Sockets (5 Pin) | Roads And Rails (roads-and-rails.co.uk) ...    although not sure if these connectors are what you are after (they do 2,3,4,5 and 6 pin versions)

Dave

[malc-c]

6 hours ago, Rob B said:

I broke the connector on the RA encoder cable on my AZ-EQ6 PRO MC015 motherboard.

To purchase a new cable, from the manufacturer, needs a special order and will take 4 months to deliver.

Anyone knows a quicker way or used purchase?

Just looked at the MC015 board and I don't have anything like that to hand.  If you can post up a picture of the cable / plug then it might be possible to locate a similar cable such as those linked to in the post above that will fit and do the same job.

I presume the PCB wasn't damaged as well ?

[Rob B]

Thanks for the offer but I just realised I never have the auxiliary encoders enabled. So no need for the cable.  Cheers.