Cable pulling HEQ5 pro

[Neil H]

Hi if you upgrade the handset lead to the lynx cable it's a lot heavier  and it pulls down on the plug were it goes into mount but here is my cheap easy fix 

Pull small cable tie into a loop then loosen bolt above were lead plugs in list tail of cable tie in bolt hole just in the top refit bolt this will trap cable tie then use the fine garden wire wrapped around loop then cable this will then hold lead at the right angle to stop plug wearing  the connections 

[teoria_del_big_bang]

Keep it simple and it wont go wrong 🙂 

Brilliant 

Steve