PHD or PHD2 settings for EQ5

[Hailfire101]

Hi there again.

Does anyone know what settings I need to put into PHD or PHD2 to guide my EQ5?
I have the RA/DA motors, and have modded the controller to have a ST4 port.

I'm using the QHY5L-II, mounted to my finder scope.

Both are asking questions about scope/mount and I dont have a clue what options to pick.

Thanks
 

[Hailfire101]

I'm stuck here.... 

Thanks in advance. 

[Cornelius Varley]

Select the correct camera from the camera drop down menu and select on-camera as the mount type if you are connecting the camera and mount's ST4 ports.

[Hailfire101]

Thanks for that. Had a feeling it was on camera,  as I'm am running the st4 from the camera to the port I have added to my controller box. 

I'm stuck here now. 

[Cornelius Varley]

Select "None"

[Hailfire101]

OK,  I've said none to that and none to AO device. 

Is it just a case of find a star,  click and it tracks now? 

[Cornelius Varley]

1 minute ago, Hailfire101 said:

OK,  I've said none to that and none to AO device. 

Is it just a case of find a star,  click and it tracks now? 

It should. PHD might need to do a spot of calibration so that it can learn the mounts behavior when corrective guiding commands are sent.

[Hailfire101]

Thank you so much for your help. 

Just need some stars now.  All this new equipment to play with and test... And no stars. Ha 

[Cornelius Varley]

If all else fails RTM