Neo_uk Posted August 8, 2008 Share Posted August 8, 2008 Hi ,It has come the time when in fed up of lugging equipment in and out of the house so I'm planning on building a obs.the design I'm thinking about is a modded pent roof shed but instead of building a support frame behind or to the side of it i decided the space could be utilised by making it a small warm room by paneling out the support frame and putting a dividing wall between the obs area and where the support frame for the roof would be i have done a very crude drawing in photoshop what do you think ?regards Chris Link to comment Share on other sites More sharing options...
centroid Posted August 8, 2008 Share Posted August 8, 2008 Chris, there's no reason why that design should'nt work for you.However, I don't know how tall you are, but the height in that warmroom looks extremely low, unless of coarse the obsy section is quite tall, but then you'd need quite a tall pier.Dave Link to comment Share on other sites More sharing options...
Trevor Posted August 8, 2008 Share Posted August 8, 2008 Hi ChrisThat’s very close to the one I have in mind.Just the pier’s at the other end, still trying to decide on 10x8 or 12x8 pent shed, the height to eaves is 6ft 2 and height to ridge 6ft 8" Link to comment Share on other sites More sharing options...
Neo_uk Posted August 8, 2008 Author Share Posted August 8, 2008 warm room would be low but only intend to be seated in there with a lappy and a nice cup of coffee .chris Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.