cloudbuster Posted March 31, 2016 Share Posted March 31, 2016 good morning everyone a problem has occured with my skywatcher HEQ5 mount.... the handset reads 'no connect to mc, stand alone mode only'. please can someone advise me or point me in the direction of someone who can fix this? kind regards bob Link to comment Share on other sites More sharing options...
Dr_Ju_ju Posted March 31, 2016 Share Posted March 31, 2016 Hi Bob, Depending on its age and provenance, either the supplier or the importer http://www.opticalvision.co.uk/ Have\do you use Stellarium\CDC to control the mount via ASCOM\Eqmod ? if so plug the control directly into the mount & see if its controllable, also check the power supply to the mount Link to comment Share on other sites More sharing options...
cloudbuster Posted March 31, 2016 Author Share Posted March 31, 2016 many thanks julian. the power supply seems fine, but i shall certainly contact opticavision. i popped out the other evening and someone knocked my mount over! the red light and handset seem fine, just cant slew! thanks again bob Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.