Ken82 Posted March 5, 2016 Share Posted March 5, 2016 I'm using a kendrick premium dew tape on my 11"edge with hitecastro controller but still getting a little dew forming in the central part of the corrector plate is that normal ? Link to comment Share on other sites More sharing options...
michael8554 Posted March 5, 2016 Share Posted March 5, 2016 Not unusual, just turn the setting on your power source up a touch. But check first that the tape is actually working, might feel warm to the touch if working. Michael Link to comment Share on other sites More sharing options...
Chris Murray Posted March 5, 2016 Share Posted March 5, 2016 Hi Ken, if you are not already you can use a dew shield as well as the heater band, i use a newt with a dew shield to protect the secendary, i also have a heater on that secendary, cheers chris Link to comment Share on other sites More sharing options...
michael8554 Posted March 5, 2016 Share Posted March 5, 2016 Well said Chris, I should have mentioned a dew shield. That's all I seem to need on my 8" SCT. Michael Link to comment Share on other sites More sharing options...
StuartJPP Posted March 6, 2016 Share Posted March 6, 2016 Maybe it is just me but people seem to obsess about dew control. A dew shield/guard (most important) and a tiny bit of heat is all I have ever needed... No dew controllers for me, just a couple of home made straps that consist of a strand of nichrome wire (wattage dependant on size of OTA) sandwiched between 2 parts of sticky backed velcro (the loop, not the hook). Cost is about £7 a piece. The heat should be barely noticeable to the touch, I use my nose to detect the warmth (it is much more sensitive than your fingers). Just my view of course. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.