triton1 Posted March 2, 2016 Share Posted March 2, 2016 just a quick question I have to buy a power supply for a Neq6 would a 12v 5amp be ok thx Jonn Link to comment Share on other sites More sharing options...
brantuk Posted March 2, 2016 Share Posted March 2, 2016 The NEQ6 draws less than 2amps so you'll be fine. Most mass market mounts barely draw 1amp John. I use the Maplins XM21X regulated power supply with no troubles: http://www.firstlightoptics.com/power-accessories/maplins-xm21x-7a-138v-regulated-mains-power-supply.html Hth Link to comment Share on other sites More sharing options...
triton1 Posted March 3, 2016 Author Share Posted March 3, 2016 Many thanks for that Brantuk I was just thinking about buying a cheap adapter from the bay that will do the job.What does annoy me is that you spend nearly a grand and they do not supply you with a adapter to try it out other than that it seems a good bit of kit. Link to comment Share on other sites More sharing options...
laser_jock99 Posted March 3, 2016 Share Posted March 3, 2016 If you buy the slightly bigger model http://www.maplin.co.uk/p/maplin-69w-dc-fixed-voltage-bench-power-supply-xm22y you can run more devices with ease. I use one of these to run two EQ6's, some dew bands and other bits & pieces simultaneously. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.