Correct altitude bolt setting

[AndyKeogh]

Some time ago I replaced the lower bendy bolt on my EQ6 with an industrial steel bolt and use a 17mm ring spanner to provide "fine" adjustment.

I did not replace the top bolt as it is only screwed in enough to take up the slack.

I am now trying to get a repeatable polar alignment and wondering if I should be using the bottom bolt to get close to the correct setting and then use the top bolt to hold it spot on.

What do other people do?

Andy

[Peter Drew]

That sounds the best approach. 

[Diripio]

^^^^^^^^^^^^^^^^^^^^^

My name is Peter Drew as well

Sorry off topic i know

[Peter Drew]

Snap!. Hope you're younger than me.