Dave_D Posted December 1, 2014 Share Posted December 1, 2014 Has anyone used this for creating toolpaths in any of their projects? learned gcode over the past few days and need to know if the sim is valid before paying out cash for parts and materials Link to comment Share on other sites More sharing options...
lennylovit Posted December 1, 2014 Share Posted December 1, 2014 I use Vectric Aspire for drawing , it works out your tool paths ( 3D roughing and finishing cuts) shows an avi of the tool pathes and outputs the G codes in many formats , then Mach3 for cnc control of my millLenny Link to comment Share on other sites More sharing options...
Dave_D Posted December 1, 2014 Author Share Posted December 1, 2014 I use Vectric Aspire for drawing , it works out your tool paths ( 3D roughing and finishing cuts) shows an avi of the tool pathes and outputs the G codes in many formats , then Mach3 for cnc control of my millLennylooks interesting but a tad pricey for a few reasonably simple objects Link to comment Share on other sites More sharing options...
lennylovit Posted December 1, 2014 Share Posted December 1, 2014 try cut 2d , cut 3d , eMachine , Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.