bruno Posted June 8, 2014 Share Posted June 8, 2014 I tried my web cam last night, using sharpcap but the best i could get was a white negatve picture ( similar to when you do sharpening in Ps) I messed about with the settings but ended up with what i could describre as a blue noise image its only a £10 webcam that i took the filter off (advent i think) anybody got any ideas thanks Link to comment Share on other sites More sharing options...
Cornelius Varley Posted June 8, 2014 Share Posted June 8, 2014 What were you trying to image ? Link to comment Share on other sites More sharing options...
bruno Posted June 8, 2014 Author Share Posted June 8, 2014 the moon Link to comment Share on other sites More sharing options...
Cornelius Varley Posted June 8, 2014 Share Posted June 8, 2014 The first thing to do is make sure that the telescope is focused. Link to comment Share on other sites More sharing options...
D4N Posted June 8, 2014 Share Posted June 8, 2014 It could be overexposed, the moon is very bright. Or there could be an LED in the camera that hits the sensor now the filter has been removed. I had one like that so I pulled the LED off the board. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
bruno Posted June 9, 2014 Author Share Posted June 9, 2014 The scope was perfectly in focus, & I,m Pretty sure the webcam has'nt an LED but will check Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.