redfox1971 Posted March 30, 2014 Share Posted March 30, 2014 Hi on buying the full copy of alignmaster and setting it up when i open the program it always displays ut:30/03/2014 and time, but time is always behind by 1 hour to the correct time and in the time box always a 1 if i zero that it shows correct time,shouldn't this automatically set with computer time?.Also when selecting read gps device i select com port but longitude and latitude dont seem to update from mount just stays lit yellow until clicking on it then allows you to continue,so whats causeing it not to read my cpc800 gps? Link to comment Share on other sites More sharing options...
Davey-T Posted March 30, 2014 Share Posted March 30, 2014 This is what mine shows now, haven't tried it since the clocks changed but now the time shows + 1.Haven't tried reading the mount GPS but works fine using the PC timeDave Link to comment Share on other sites More sharing options...
redfox1971 Posted March 31, 2014 Author Share Posted March 31, 2014 This is what mine shows now, haven't tried it since the clocks changed but now the time shows + 1.Haven't tried reading the mount GPS but works fine using the PC timeDaveAlignmaster.jpgHi Dave dose the time match pc time or is their hour difference when u have +1 in box? Link to comment Share on other sites More sharing options...
Davey-T Posted March 31, 2014 Share Posted March 31, 2014 The UT time is the same as GMT and the 1 in the time box means 1 hour ahead of UT/GMT which is the time on the PC.Hope that's clearer than it sounds Dave Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.