Jump to content

my first seben


Recommended Posts

welcome to sgl  Is it one of these

http://www.amazon.co.uk/Seben-700-76-Reflector-Telescope-incl/dp/B00426KOQI

If you assembled it properly (make sure all the bolts on the tripod are tight else the mount will be very wobbly) now all you have to do is line up the finderscope with the main scope.

stick the eyepiece with the biggest number in the main scope and try and focus on something far away (0.5-1 mile away) A radio antennae with a big red light is good this time of night or a street light that is easily identifiable from the rest. Now tighten or loosen the screws holding the finderscope till the cross hairs are pointing at the same place. Now put an eyepiece with a smaller number in and repeat the process keep going down your eyepieces until you can't get it any better. your finderscope is now aligned. Now you put your eyepiece with the highest number (lowest power) and move the scope using your finder scope until the cross hairs latch onto something (try the moon) look through your main eyepiece and focus. the moon should be in view. Hope that helps

Link to comment
Share on other sites

congrats on your new scope. i would start with your lowest power eyepiece the H20mm which will give 35x magnification. the moon is an excellent object to begin to learn how to use your scope. once you find the moon in the eyepiece, align the small "finder scope" with the main tube. so that you can see the moon through this and the main scope at the same time.  

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.