ultramol Posted December 28, 2013 Share Posted December 28, 2013 Has anyone had the same experience as me. the long threaded latitude bolt on my EQ5 mount has bent like the letter s !!!. Thankfully the threaded hole is still ok but I was wondering if this is common and is there a remedy for this... Link to comment Share on other sites More sharing options...
inedible_hulk Posted December 28, 2013 Share Posted December 28, 2013 Hi, I believe it's a common problem with the EQ5 & HEQ5. I replaced my EQ5's stock bolts with some stainless steel ones from Astro Developments (http://www.ebay.co.uk/itm/EQ5-CG5-Replacement-upgrade-Altitude-Adjustment-Bolts-/280618415279). Glad your mounts otherwise unaffected Link to comment Share on other sites More sharing options...
ultramol Posted December 28, 2013 Author Share Posted December 28, 2013 Thanks for the link, just what I need. Oooops. Meant to put altitude bolt not latitude bolt in my original post, Thanks again for your quick reply....Geoff Link to comment Share on other sites More sharing options...
Ibbo! Posted December 28, 2013 Share Posted December 28, 2013 remember to loosen the opposite one before tightening the otherI know its logic but in the cold,dark and with lack of sleep you can forgetSteve Link to comment Share on other sites More sharing options...
ultramol Posted December 28, 2013 Author Share Posted December 28, 2013 Yes Steve, It does make sense although the bolts seem very flimsy for what they are expected to do work wise. Link to comment Share on other sites More sharing options...
Ibbo! Posted December 28, 2013 Share Posted December 28, 2013 I agree they are poor, but you can even bend the replacements if you use enough forceSteve Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.