A Question about stacking in Pixinsight

[lensman57]

Hi,

I have the latest version of the software and I wish to try to stack a few subs to see how it compares to DSS or Nebulasity3.

In Neb I usually make a master bias which is then subtracted from the flats before I stack the flats. Am I correct in using image integration with default settings to combine the bias frames, then calibrate the flat frames using " image calibration" then back to " image integration " to combine the flat subs before going over to the darks or is there a simpler way?

Many Thanks,

A.G

[swag72]

There is a simpler way - If you go to 'scripts' - Click on the batch pre processing and you can chuck everything in and it chucks everything back out at you!! It's that easy!!

[lensman57]

There is a simpler way - If you go to 'scripts' - Click on the batch pre processing and you can chuck everything in and it chucks everything back out at you!! It's that easy!!

Thanks Sara, will do as instructed.

A.G

[Physicist13]

what Sara says! (if you  want to mk your own master bias then stack with no weighting, straight averaging). Its the Bees knees of s/w!