Paul41star Posted January 5, 2013 Share Posted January 5, 2013 I want to extend the existing cable which connects my telescope to the AtoZ Hand Controller in order for me to control my telescope from a distance.Can anyone tell me what type of cable this is? One end looks like it is similar to an Ethernet adapter (RJ45) which plugs into the controller. The other end looks like a broadband router connector (RJ-11Telephone/adsl)In each of the connections only 5 of the wires are being used which suggests to me that telephone/Broadband cable should work. Also on the hand controller it appears there are 2 input connectors and it can either accept RJ-45 or RJ11 connectors. Certainly i have already attempted plugging in telephone cable but this certainly does not work.Anyone done this before? Is there a wiring diagram anywhere? What type of cable do i require?Thanks in advance. Link to comment Share on other sites More sharing options...
Black Knight Posted January 5, 2013 Share Posted January 5, 2013 I can't help you, but it may be worth calling or emailing Andy at Astronomiser. He makes all sort of cables and may be able to help.http://www.astronomiser.co.uk/index.htm Link to comment Share on other sites More sharing options...
msh1 Posted January 5, 2013 Share Posted January 5, 2013 this may help http://www.ebay.co.uk/sch/aqua-e3y/m.html?_nkw=&_armrs=1&_from=&_ipg=200&_trksid=p3686 i have dealt with them before very helpful Link to comment Share on other sites More sharing options...
Cornelius Varley Posted January 5, 2013 Share Posted January 5, 2013 Search ebay or amazon for a rj45 extension cable. The extension cable should have a female socket (plug the existing cable into this) and a rj45 male plug (plug this end into the handset). Link to comment Share on other sites More sharing options...
Paul41star Posted January 5, 2013 Author Share Posted January 5, 2013 Thanks for the advice and certainly sounds like RJ45 extension cable will do the trick.I was reading on other forums that some telescopes are connected via serial connection directly to computer. Do any of you know if my mount can be connected directly to PC and therefore remove the AZ controller from the equation.Certainly my telescope does not have a serial connector and i don't think it is using RS232 cable?Possibly there is some USB convertor cable to cable 'X' connected to telescope 20 metres away that i am connect directly to PC. Or possibly this is not possible with the type of mount i have.This site here describes a convertor but appears to only support EQ type mounts and not mine. http://www.firstlightoptics.com/hitecastro/hitecastro-eqdir-adapter.htmlAnyone advise if its possible for straight connection to PC using my mount? Link to comment Share on other sites More sharing options...
Spikey Posted January 5, 2013 Share Posted January 5, 2013 Welcome TO SGL Paul, nice choice of scope You can control the mount from a PC but would still need the handset. Stellarium (free) can do this.Here's a thread with some of the information http://stargazerslounge.com/topic/93700-skymax-127-on-az-goto-mount-day-1/ Link to comment Share on other sites More sharing options...
Paul41star Posted January 5, 2013 Author Share Posted January 5, 2013 Thanks for advice again. I read through the post and it appears i keep the existing connection between my controller and telescope and put it into PC Mode. So my last question is how do i connect my PC via USB to the AZ Controller itself.On the other forum you pointed me to there was a link for RS232 to USB adapter. However, looking at this one end is USB (correct) but the other is a serial connector which won't plug into anything? Do i then have to find another lead which plugs into the serial connector and then into the controller? The SynScan AZ controller does havea space lookng 6 pin connection but looks like broadband connection type connector? This appears to be what i would use to connect to PC. Possibly> RS232 to USB Adapter (+drivers) then from RS232 serial connector to what appers to look like an RJ11 connector?Also for the SynScan AZ Controller can someone confirm what the connectors are officially called?1 > Looks like standard RJ45 Connector > this goes to telescope with existing cable that came with telescope2 > Looks like RJ11 type connector (smaller) > Unused at the moment but i'm assuming this is what i could use to connect to PC.3 > Power connection for using in standalone mode as the power is currently transferred from telescope to connector 1.Thanks Link to comment Share on other sites More sharing options...
Cornelius Varley Posted January 5, 2013 Share Posted January 5, 2013 The other end of the serial cable plugs into the middle port (2) of the handset. This port is used for connecting to a pc for either comtrolling the mount via the handset or for upgrading the handset's firmware. Link to comment Share on other sites More sharing options...
Paul41star Posted January 5, 2013 Author Share Posted January 5, 2013 Thanks. Can you tell me the name of this serial cable from PC to the middle port (2) of the handset is called? Where would i get one? I have only ever seen Serial cables with big PC connectors at each end which i would use to connect to PC Serial port if it has one. This is where my USB to Serial convertor would come in.However, i have not seen a lead which has PC Serial Connector to small middle port(2) handset controller (small). Where would i get one of these? Link to comment Share on other sites More sharing options...
Cornelius Varley Posted January 5, 2013 Share Posted January 5, 2013 The cable, according to Skywatcher, is called a PC-link cable, most astro dealers should stock them http://www.firstlightoptics.com/astronomy-cables-leads-accessories/serial-cable-for-skywatcher-and-celestron-mounts.html . The handset ports are officially named (1) mount port, (2) multi-purpose port and (3) power port. Link to comment Share on other sites More sharing options...
Paul41star Posted January 5, 2013 Author Share Posted January 5, 2013 Sorry pretty sure I know what i am going for now as found the correct leads on ebay. It is a USB to Serial convertor (female). Plug into this Male Serial connector to Middle port on controller. Just unsure of the offical name for this connector type at the controller end? There is one on ebay but i would prefer to know the name of this adapter so i can make one myself;http://www.ebay.co.uk/itm/USB-Cable-for-Synta-Synscan-Skywatcher-PC-connection-/121047383572?pt=UK_Photography_Telescopes&hash=item1c2efc7e14 Link to comment Share on other sites More sharing options...
Paul41star Posted January 5, 2013 Author Share Posted January 5, 2013 Also just to add. Why has no-one simply built USB > Small Connector removing the need for female serial/male serial? Appears to me i should be able to make USB to serial cable which will connect directly into the SynScan. This should be possible and reduce costs? Link to comment Share on other sites More sharing options...
Cornelius Varley Posted January 5, 2013 Share Posted January 5, 2013 The handset is a serial device, not a usb device, so you still need to convert the signal from the usb port into something that the handset can handle. Whatever way you connect the handset to a pc's usb port you will still need a usb/serial adapter. Link to comment Share on other sites More sharing options...
bigwheels Posted January 6, 2013 Share Posted January 6, 2013 the cablel is a Rs-232 see this link http://ca.skywatcher.com/_english/03_accessories/02_detail.php?sid=96 Link to comment Share on other sites More sharing options...
bigwheels Posted January 6, 2013 Share Posted January 6, 2013 Also see here http://www.firstlightoptics.com/search.html Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.