libraryman Posted September 30, 2011 Share Posted September 30, 2011 Hi hope this is the correct forum; i want to clear all my excess com ports, when i connect my serial to usb it gives me com port 24 now too many #'s the operating system is vistacan i clear them to allow me to connect my camera to my imagies plus Ray Link to comment Share on other sites More sharing options...
RogerTheDodger Posted September 30, 2011 Share Posted September 30, 2011 You can re-assign it to a lower port number that you are not using in device manager.Right click and select Properties, on the Port Settings tab select Advanced, and you will see that you can set the com port number - as long as you are re-using a com number that is not currently used you can ignore the warning message. As long you plug the devices into the same USB port it'll retain that com number.HTH Link to comment Share on other sites More sharing options...
libraryman Posted September 30, 2011 Author Share Posted September 30, 2011 Cheers Roger, i've changed it and it seems to work, i'll connect up now and test it.Ray Link to comment Share on other sites More sharing options...
libraryman Posted September 30, 2011 Author Share Posted September 30, 2011 Thanks Roger it worked a treatRay Link to comment Share on other sites More sharing options...
RogerTheDodger Posted October 1, 2011 Share Posted October 1, 2011 You're welcome Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.