Jump to content

NLCbanner2024.jpg.2478be509670e60c2d6efd04834b8b47.jpg

Knighty2112

Members
  • Posts

    6,223
  • Joined

  • Last visited

  • Days Won

    4

Everything posted by Knighty2112

  1. HI DRT. Ive heard people rave about the Telrad, but to be honest i prefer a little magnifiction when I use my finderscope, so most likely will never use a Telrad or Orion.
  2. Hi Dave. Not got one yet. I'm hoping if funds allow after I get paid to get it at the end of this month. If not it will be in May when I get it. All people who have responded have great things to say over it, so it should be a great upgrade to the scope & make focusing much smoother & easier.
  3. Thanks John. I know I'll need to do a little DIY to my scope to refit the finder scope. Just need to have a steady hand when I drill some holes to fit a new synta shoe.
  4. No, it stays in focus OK once focus is achieved. I did tighten the rack up a little when I fitted the focuser motor, and I lock of the focus when I do achieve it too. I just find it a little tricky to get sharp focus well without having to jab the buttons on the focuser a few times.
  5. Hi all, for my next upgrade on my Skywatcher Startravel 120mm refractor I'm thinking of upgrading the focuser to a dual speed 2" Crayford focuser http://www.firstlightoptics.com/skywatcher-focusers/sky-watcher-dual-speed-2-crayford-focuser-for-sky-watcher-refractors.html A couple of questions though before I possibly fork out for one in the next month or so; 1) Does it need any other adapter ring or anything to fit OK into the existing place where the stock focuser sits on the ST120? It is just a straight swap right? 2) Does the two speed focuser action significantly improve the action to get a sharper focus much better and easier? I currently have a Skywatcher Auto focuser fitted to the stock focuser on the scope, but find the constant small jabs back and forth you have to do on the keypad a little annoying to get good focus, and hope the finer focusing option on the Crayford focuser might be easier to achieve by hand again if fitted to the scope. Regards, Gus
  6. Great. Make sure I have the day off work to view this, and hope by June time we get some nice clear weather.
  7. I got the Skywatcher 6 X 30 right angled finderscope for my new ST120 refractor scope, and for just over £31 was very surprised at how good the stars looked through it ( i.e normal), and could easily make out M31 with it too in my light polluted, street lamp infested back garden. Only thing I made a mistake with was I ordered the wrong one up by mistake. I got the east is west, west is east version, and not the correctly orientated view. But I can live with that quite easily. Dead easy to calibrate it to the scope to with one spring loaded screw, so you only have to twiddle two screws to achieve correct alignment.
  8. Most likely an incorrectly set secondary mirror. I have the same scope, and tried to set my secondary mirror as suggested in Norton and other astronomy books, and also from articles and videos on the Internet. After getting my secondary mirror as close as central in my viewfinder as I possibly could, I then found that my scope would no longer focus correctly. Distant objects were not able to achieve correct focus. I quickly put my secondary mirror back in the position it was originally (as best as I could remember) and all was well again.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.