Finished the long slomo cables🙂

[Robindonne]

So after spending €15,- on 3 long flexible screwdrivers, i only had to make it fit the mount shafts.  
The set has a 1/4 hex, 1/4 square and 7 mm hex hose clip driver. 
 

its really a 2 min job.

The 7mm hose clip driver is drilled to 8mm round, and a 3.3 mm side hole to thread it to m4 for a small thightening screw.

The 1/4 hex is connected on a Festool bit/drill combo.

The changed hose clip driver gives the most normal look, the 1/4 hex driver is the most easy removed ( it snaps on the bit shaft) 

I’ll probably buy a second set to make two equal cables per mount.

For the £13/€15 I’m pleased with it.  They are 600mm and soft grip. And most important, i just couldn’t find astro-dedicated long slomo cables

Ps. I think if a mount has 6 mm shafts, the work will be more easy. The 7 mm hose driver will probably fit without drilling, and the 6mm hex/drill combo is in much shorter versions available than the 8 mm combo

Edited January 21, 2021 by Robindonne