Adam1234 Posted October 17, 2020 Share Posted October 17, 2020 Hi all, I've treated myself to the ZWO electronic automatic focuser (EAF), but I have a question about installing it to the SW ED80. The instructions say to 'Remove the coarse adjustment knob of the telescope focuser using a suitable sized wrench', my question is, how do I remove the course focus knob on the ED80? I would have thought there would be a screw in the bit marked red in the picture to remove it, but alas, there is not (not sure what the purpose of that hole is then). Cheers Adam Link to comment Share on other sites More sharing options...
Adam1234 Posted October 18, 2020 Author Share Posted October 18, 2020 Silly me, I figured I had to rotate the focus knob until the screw came in line with the hole... 2 Link to comment Share on other sites More sharing options...
Adam1234 Posted October 18, 2020 Author Share Posted October 18, 2020 (edited) I potentially have another hurdle now - I have attached the flexible coupling thing to the focuser, now need to attach the EAF to the coupler - but I think the focuser bar is protruding too much into the coupler, so the EAF won't fit properly all the way in. It still locks into place but I don't know whether it should be all the way in, the pictures in the instructions show it to be all the way in. EDIT: it's not locking into place properly, I was just about to put it out, the locking screws are only locking onto the end of the bar on the EAF. Is the focuser bar able to be adjusted so it protrudes a bit less? Edited October 18, 2020 by Adam1234 Link to comment Share on other sites More sharing options...
Davey-T Posted October 18, 2020 Share Posted October 18, 2020 (edited) There's lots of adjustment in the attaching bracket, wasn't enough form me though so had to make one. Dave Edited October 18, 2020 by Davey-T Link to comment Share on other sites More sharing options...
Davey-T Posted October 18, 2020 Share Posted October 18, 2020 1 Link to comment Share on other sites More sharing options...
Adam1234 Posted October 18, 2020 Author Share Posted October 18, 2020 I've managed to get it on now, and secured the bracket in place. I had to make a few adjustments to where the coupling thing sat on the telescope focus bar. Now to get it set up with the software 1 Link to comment Share on other sites More sharing options...
Adam1234 Posted October 18, 2020 Author Share Posted October 18, 2020 Well I would get it set up with the software.... but there appears to be an issue with various aspects of the ZWO website, including the software page, so I can't get the ascom driver 🙃 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now