Lx90 12 inch

[james123]

Hi guy need a bit of advice. Got my power cord caught on my lx90 12. It has loosened the jack plug on the fork arm.does anyone know how it's. fixed to the internal control board. Eg will I have to take it of and solder on again. I'm still getting power from the jack but as I've said it loose now ? Any help appreciated 

[Shimrod]

6 minutes ago, james123 said:

Hi guy need a bit of advice. Got my power cord caught on my lx90 12. It has loosened the jack plug on the fork arm.does anyone know how it's. fixed to the internal control board. Eg will I have to take it of and solder on again. I'm still getting power from the jack but as I've said it loose now ? Any help appreciated 

I can't help directly on the control board, but there is an image here (post 3) that looks like it is soldered on:  LX90 power socket

On my LX90 I always used to loop the power cord around the carry handle so that if it got caught the strain wasn't applied directly to the power socket.

[james123]

Ty shimrod.all advice appreciated