Steve Clay Posted June 7, 2020 Share Posted June 7, 2020 Question for AZEQ5 owners. Can the mount be used manually in alt az mode I.E pushed in each axis with a bit of clutch/ friction, no power. I know there would be no slow motion control. Can it track without alignment. Might sound a weird question but I have my reasons. Cheers Steve Link to comment Share on other sites More sharing options...
GordonD Posted June 7, 2020 Share Posted June 7, 2020 (edited) Hi Steve I use mine without power sometimes, as a kind of grab and go, although it (well, mine anyway) is not very smooth to push around that way. With regards to tracking without alignment, yes. When I am just going to use it visually on the moon say, I don't always bother to go through an alignment process. As long as it is turned on whilst pointing in pretty much north and level ( in alt-az mode) you cam use the go-to to get near the target and once homed in, it will track well enough for visual use. I confess I don't use mine much in alt-az mode because of the slop in azimuth - at least in eq mode you overcome that a bit by being slightly out of balance. Hope that helps. Gordon Edited June 7, 2020 by GordonD 1 Link to comment Share on other sites More sharing options...
johnturley Posted June 8, 2020 Share Posted June 8, 2020 (edited) I have an AZ-EQ5 mount for my ES 127 Refractor which is used for quick grab and go, and to access parts of the sky which are blocked off by trees from my observatory shed. I actually found it easier to set it up in EQ mode, and after setting my latitude by the scale on the mount (I know that it's not very accurate), and pointing the telescope in a north-south direction (determined by the shadow of the sun at local midday), I found that an object using a medium power eyepiece (around 100 x) would stay in the field of view for around 20-30 minutes, which is as accurate as I require as I only use it for visual. I have never used one of the alignment modes which the mount can perform. John Edited June 8, 2020 by johnturley 1 Link to comment Share on other sites More sharing options...
Dr Strange Posted June 8, 2020 Share Posted June 8, 2020 If I recall correctly there are encoders on both axis' that allow you to release the clutches, star hop, then reengage the clutches and go back to GOTO. I would call or send an email to FLO and ask. They are very helpful and very quick to respond. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now