Busted d type on eq6, what pins do I need connected

[blinky]

I managed to damage the d type on my eq6 when doing the strip and regrease. I've got a little breakout pcb for the socket and was wondering what pins I need to connect as I dont use the handset, just a lynx astro ewmod cable. I believe it's only 3 pins I need to connect.....

Edited May 7, 2020 by blinky

[blinky]

Found this:

 

Connect or splice a 9 way "D" type plug/cable to the flying lead of the TTL232R. The connections are as follows:

Solder Pin 6 of the 9 way D-type Plug to the Orange wire (TXD).

Solder Pin 9 of the 9 way D-type Plug to the Yellow wire (RXD).

Solder Pins 4 & 5 of the 9 way D-type Plug to the Black wire (GND).

 

On this page: http://eq-mod.sourceforge.net/eqdirect2.htm

 

So I think I only need to connect pins 6, 9,4 & 5?