ZiHao Posted April 28, 2020 Share Posted April 28, 2020 I am currently using a ST4 cable to guide, so do I need to select anything under the Aux Mount selections? There is a 'ZWO USBST4 ASCOM' option. Link to comment Share on other sites More sharing options...
Merlin66 Posted April 28, 2020 Share Posted April 28, 2020 I use a Starlight Lodestar for guiding my NEQ6pro mount and ST-4 connections and EQMod. The Aux in PHD needs to be set to "EQmod ASCOM HEQ5/6" - this then allows PHD to access the RA and Dec of the target object. Hope this helps. Link to comment Share on other sites More sharing options...
ZiHao Posted April 28, 2020 Author Share Posted April 28, 2020 7 minutes ago, Merlin66 said: I use a Starlight Lodestar for guiding my NEQ6pro mount and ST-4 connections and EQMod. The Aux in PHD needs to be set to "EQmod ASCOM HEQ5/6" - this then allows PHD to access the RA and Dec of the target object. Hope this helps. I thought EQMOD only works when you have a EQDirect cable? I have been selecting 'None' in the previous sessions. So I have to install EQMOD as well right? The ASCOM drivers are installed as I am using ASI120MC to guide. Link to comment Share on other sites More sharing options...
Merlin66 Posted April 28, 2020 Share Posted April 28, 2020 No, you should be able to use the handcontroller to control your mount. for PHD just add the HEQ5 as the Aux mount. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now