Sitech and PHD, not pulseguiding

[Horwig]

I'm getting there with the re-work of my self built fork mount, and have everything rebuilt, but as reported some weeks ago, Ascom pulse guiding is not working but ST4 is fine. I've connected PHD to Sitech via POTH, and when using manual guiding in PHD can see the commands in the POTH traffic window, but looking at ticks in controller stuff in Sitech, nothing is changing.

I'm on the latest version PHD2 and Sitech, anybody with any idea what I'm doing wrong?

 

Huw

[Thalestris24]

18 minutes ago, Horwig said:

I'm getting there with the re-work of my self built fork mount, and have everything rebuilt, but as reported some weeks ago, Ascom pulse guiding is not working but ST4 is fine. I've connected PHD to Sitech via POTH, and when using manual guiding in PHD can see the commands in the POTH traffic window, but looking at ticks in controller stuff in Sitech, nothing is changing.

I'm on the latest version PHD2 and Sitech, anybody with any idea what I'm doing wrong?

 

Huw

Hiya

I've no idea I'm afraid (never used Sitech) but just wondered if it could be an Ascom/configuration problem?

Hope you can sort it!

Louise

[Horwig]

I removed Sitech and its config folder and re installed, all good now, no idea what caused it, but all's well that end well

 

Huw