ultramol Posted October 5, 2015 Share Posted October 5, 2015 I used my 350 d for the first time last night on my SW200p. The problem is the focuser would not move with the camera attached. I have an auto focuser on my scope. I loosened the grub screw but the difference between moving and not moving was fractional and it was either very loose or tight. Has anybody had this trouble and is there a fix for it please...many thanks....Geoff Link to comment Share on other sites More sharing options...
Tinker1947 Posted October 5, 2015 Share Posted October 5, 2015 Does you scope have the duel speed adjuster, the 10-1 reduction knob should work when motorized, if not i suspect it's to much for the motor to move..... Link to comment Share on other sites More sharing options...
sidelight Posted October 5, 2015 Share Posted October 5, 2015 The camera can be quite heavy especially if its pointing upwards. This probably explains far better than I can CheersRoss Link to comment Share on other sites More sharing options...
ultramol Posted October 5, 2015 Author Share Posted October 5, 2015 That is the exact same setup as mine, same motor as well. I will do this mod and see if my problem goes away ( I think it just might ).....Thanks again.....Geoff Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.