Shelster1973 Posted September 26, 2015 Share Posted September 26, 2015 Having realised that the current mounting arrangement for my mount on pier is no where near suitable, have decided to go down the route of a disc brake on the top mounting plate.Went for the good old Skoda Favorit one.As there is currently a rather large hole in the middle of the top plate at present where the mount sticks through, am I right in thinking that so as to get the proper securing I will need to get me some welding done and stick a bar across the middle, as is shown in post #9 in this thread.Cheers Link to comment Share on other sites More sharing options...
Pan Euro Posted September 26, 2015 Share Posted September 26, 2015 I just used a bar with a hole in the centre and wide enough to fit inside but no welding it works ok for me. Link to comment Share on other sites More sharing options...
Shelster1973 Posted September 26, 2015 Author Share Posted September 26, 2015 Cool. Will give that a go next week some timeSent from my SM-N910F using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.