Cable Tidy up Phase 1

[Earl]

Phase one of my tidy up, this has removed the loom between the Hub pro and the scope and leaves less cables going down the mount.

I have a smaller RS232 lead coming to tidy up the focus control next

[ollypenrice]

Don't get so tidy that replacing a duff USB cable will take a day. I want any cable to be replaced in ten minutes. But tidy is good. Elastic is a great material because it is... elastic!

Olly

[kirkster501]

Use the velcro cable ties for tidying the loom so they can be moved at will. Do not used the PVC ones that need to be cut out with wire cutters.

Summat like these:

[Earl]

Yes both very good points, Olly all my USB leads are free for access bar the on in the TS lodestar adapter that needs a litle extracing, which is half the idea with that anyhow.

The PVC tie is on a lead which will be replaced with a much shorter one next week when it arrives.

The two remaing cables which id like shorter are ther temperature senson for the focuser and the dew band lead, however they are not as easy of the shelf.

My USBs are all 50cm leads now and I have found a 25cm lead also which will be handy, also while at it im making them all white rather than black