assouptro Posted February 16, 2014 Share Posted February 16, 2014 HI everyoneWe sometimes, due to necessity have to pull expensive sensitive pieces of equipment to pieces.I had to recently strip my Meade 6.3 focal reducer as it had a water mark in-between the lenses. During this careful process I lost track of which lenses were front and which were back!The reducer consists of 4 lenses in 2 groups of 2 bonded lenses. Is there any way of identifying them as front and back, and making sure they are the right way round??I know this is a lot to ask and I also know I should be more careful (I will be next time) Thanks in advance for any helpclear skiesBryan Link to comment Share on other sites More sharing options...
Merlin66 Posted February 17, 2014 Share Posted February 17, 2014 Looking at my reducer, the flat surfaces of the lenses seem to face outwards.I'd assume both lens pairs are the same (!?) so they should work either way.... Link to comment Share on other sites More sharing options...
assouptro Posted February 17, 2014 Author Share Posted February 17, 2014 Thanks for taking the time to reply to my inquiry MerlinI'll take another look at itRegards and clear skies Bryan Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.