Jump to content

Banner.jpg.b83b14cd4142fe10848741bb2a14c66b.jpg

Yet another power tank


Pitbull

Recommended Posts

well folks, after losing a night because I hadn't charged my batteries and reading all the other build projects on here I thought it was time to give it a go myself.

I had an old tool box in the shed sat idle and measured it up and yes it would hold a 12 V leisure battery and so the project was born

post-10453-0-75650800-1370701623_thumb.j post-10453-0-95747100-1370701659_thumb.j

The toolbox cleaned and ready. I decided to put my accessories in the compartments so I have all my kit in one place

post-10453-0-28845100-1370701747_thumb.j

Bottom section tray

post-10453-0-16600300-1370701767_thumb.j post-10453-0-85402900-1370701784_thumb.j

Top box and tray.

The beuty with this box is that ther top box is strong to allow you to stand on it during DIY so it will double as a stool.

Next installment will be the power tank.

Link to comment
Share on other sites

So on to the power tank, after reinforcing the floor of the box with some ply, It made for a nice snug fit for the 75 Ah leisure bttery I had purchased (a 100 Ah battery was too tall)

post-10453-0-54374100-1370702076_thumb.j

Adding the divider gives somewhere to fix the fuse box to and a compartment for the wiring to sit.

I drilled the side and mounted the sockkets, switches (red neon to prevent losing night vision) and a meter to monitor the battery content.

post-10453-0-73255700-1370702225_thumb.j

A few screws and some wiring and crimping and we have the power to the fuse box and Negative returns. Put it all together and we have our finished product.

post-10453-0-25035700-1370702240_thumb.j post-10453-0-21842700-1370702256_thumb.j

The cables need to be tidied up a bit, I left them fairly long so that the divider can be slid out to change any fuses without having to disconnect it all.

post-10453-0-65153000-1370702272_thumb.j

The beast all together

post-10453-0-19394300-1370702286_thumb.j

And a nice healthy output. Tested on the mount and all works fine, now to give it some use tonight :)

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.