PHD and a NEQ6

[robbieince]

If you have on mount selected innphd When you press the buttons in phd it will move the mount at guide speed. that's way too slow to perceive by eye or ear.

You need to look at a star image in phd - select the continual exposé button (a looping arrow) and see if the stars move when you press the buttons for a few seconds.

Alternatively try to do a calibration and the mount will move itself in the same way.

Regards

Rob

[robbieince]

The on mount option in phd means use the st4 cable connection route shush uses the cable that goes directly from the camera to the mount.

In this mode you don't need eqmod

Regards

Rob

[Tinker1947]

Yes Robbience, USB cable PC to Lodestar, Guide Cable, Lodestar to Mount, just run PHD and only 1 cable as the power is taken from the USB Connection, works lovely, but doesn't get rid of the cloud's...